| |
|
The primary development goal for the KTM X-Bow was not attaining extreme final velocities, but in optimising the driving dynamics. The sports car is thereby aided by an ingenious aerodynamics arrangement, the result of many hours in Dallara’s wind tunnel. The most vital element in this area is the underbody, which is equipped with a prominent diffusor at the rear. To make this diffusor work even more effectively, the linking points for the rear suspension were set as high as possible. This enables the KTM X-Bow to achieve a phenomenal downforce of about 200 kilograms at a speed of 200 km/h – about three times more than most other supersport cars.
In combination with the high-performance chassis, this fantastic downforce makes extreme curve speeds possible. The transversal acceleration of 1.23 g that can thus be attained noticeably surpasses the usual values achieved by street homologated sports cars.
The aerodynamic concept was a great challenge for the designer as well. It meant that sufficient air had to be channelled into the inlets located in the sides, behind the passengers. The radiator is also located at the rear of the vehicle, to avoid having to install longer, heavier cooling hoses. This mission was accomplished by using special air baffles, which are installed horizontally on the sides of the car so the passengers can also use them as boarding aids.
|
|
|
|
|
